For Sale Giulietta Parts-

justcallmefred · #1 (**permalink**) 10-21-2011, 05:08 PM

This past year I've acquired alot of parts and I want to do some work/re-model stuff in the shop over the winter. Mostly suspension, complete front ends, steering boxes, idler boxes, trailing arms even the upper locating a-frames. Some brake drums, (need to measure) engine blocks, heads and cranks, normale int. manifold(s) The block numbers are listed in the Giulietta section. Some driveshafts, a Marelli starter, a new spider soft top, heavy vinyl with a cloth back. A brand new Wolfe steel spider trunk floor -3 pieces. A spider dash core cut out of a car (no- I did'nt do it!) that I always wanted to make into wall art. Trans mounts, frame stiffeners, all those brake fluid resevoirs I've advertised before. I now have 3 complete (front and rear) sets of sprint windshield trims, clutch rods -all at fair prices! Let me know -PM or giuliasuper1967@aol.com, thanks, Fred.

justcallmefred · #2 (**permalink**) 10-23-2011, 05:24 PM

2x steering column supports, 2x alloy 4 bladed fans, pedal boxes and an odd assortment of mis-matched spider windshield posts and at least one each of the bottom and top pices for same- that is a giulia/giulietta windshield "frame"

Fatfishblu · #3 (**permalink**) 10-24-2011, 01:45 PM

Do you have any window cranks. I have a '58 Veloce project that needs some. Thanks.

justcallmefred · #4 (**permalink**) 10-26-2011, 12:22 PM

I finally opened and inspected the two giulietta diffs I have and one is a 4.56 and the other is a 5.12 -both in good shape with decent wear patterns.

**gjk69alfa** · #5 (**permalink**) 10-26-2011, 02:52 PM

Email sent.

Also could use a 750 Sprint hood.

George

lolaalfa · #6 (**permalink**) 10-26-2011, 03:16 PM

Might you have a RH Idler elbow w/ good bushing for a LH Drive 101 Giulia?
Thanks,
Cap

justcallmefred · #7 (**permalink**) 10-26-2011, 03:39 PM

Cap, if I'm right you are talking about an idler box with the arm? Yes -I have one in good shape, $100.00? plus something for shipping, thanks, Fred.

lolaalfa · #8 (**permalink**) 10-26-2011, 04:42 PM

Fred,
I call the idler that elbow shaped link that transfers the steering input from the tie rod across the front that transfers the input to the track rod which is connected to the RH steering arm. If that's what you have ,Ill take it. You can call me at 802-253-7662.
Cap