11-05-2009, 07:57 PM
|
 |
Registered User
|
|
Join Date: Jun 2003
Location: Granolaville, Washington
Posts: 3,693
|
|
Hhmm - thanks guys!
 Quote:
Originally Posted by Alfisto Steve
The 24v engine low oil pressure sender is in oil filter/oil pump pressure relief valve housing and rear motor mount housing assembly correct? What do you do with this set up when you install a 24v engine in a Milano or GTV6?
|
 On the race car I tapped the oil-pressure take-off plate and tapped the sender there...
Can somebody please post the numbers stamped on the 12v and the 24v Oil-Pressure senders?
__________________
Full-Race 3.7 Litre 24v Milano; Street/Track 3.0 Litre 24v Milano Verde; 6-speed 3.45 litre 24v Street 164 LS/Super; Future 24v Projects; '06 Scion XB - Runs!
|