|
not so hard. Make a template, use a whiteboard marker.
There is an area inside the wheel, outside the 4 bolt hole pattern in which you could make an aly template. This in order to make a circle. Then fit a hubcap, and surround with whiteboard marker. Calculate inner circle of hubcap on inside (since it is folded in in order to be held by the clamps on the wheel)
Mark this on wheel.
Then mark three times 120 degrees. Drill holes of about 3mm. If wrong, no big deal as on inside of hubcap.
Do not use the well, let me say it this way as I know no other: Phallus shaped retainers. Use a folded piece of metal which you screw on the wheel. (tap M4 thread in wheel) Affix hubcap.Repeat procedure three other times. Enjoy envious looks from fellow Alfisti...
__________________
4 Berlina's , one Scalino, and a Ferrari 308GTS to boot. Cool!
|