View Single Post
  #10 (permalink)  
Old 06-09-2009, 06:52 PM
Alfissimo Int.'s Avatar
Alfissimo Int. Alfissimo Int. is offline
Registered Alfa Addict
Platinum Subscriber
 
Join Date: Dec 2003
Location: Tempe, Arizona-US
Posts: 5,054
Quote:
Originally Posted by multicam View Post
Here's a photo of my recent rebuilds. They are off a 94 LS , the rears are the same for all the 164's. The caliper mount bracket say's LUCAS on the other side.

They were rusted to the point that the pads were fixed in place.
The front were being used exclusively and did a good job with braking.

Now these rebuilds are coated with Eastwoods Crystal Diamond extreme clear, impervious to brake fluid and can take heat up to 600 degrees F. Hopefully they will not rust as fast.
All rears on the 164s 1991-1995 are Girling 38mm

Fronts on 1994-1995 are Lucas 57mm
Fronts on 1991-1993 are Girling 54mm (2 types, early and late)
__________________
Jason Minos


<-GT Bertone, Spider, 75, GTV6, 164, all New models->.
http://www.alfissimo.com Alfa Parts

Tel: +1 480-858-9156
Contact@alfissimo.com
Alfaparts@alfissimo.com
<1991' 164 QV, White- Recaro>
Reply With Quote