Hi Jorg,
Here are some pictures. The first two are the spare area. Note the rubber mat has a little Alfa glue
on the corner, and underneath is a sound / heat drape, like the one under the hood. The insulation is glued to the body with more Alfa glue
.
Next is the foot well, passenger side. The compressed insulation there is very firmly glued
to the floor. The edge of the vinyl from under the seat appears to have the front edge glued underneath. The transmission hump is visible here, and in the last picture. It too is covered with the compressed jute like material, firmly glued down (Alfa used LOTS of GLUE!
)The very front has a piece of grey open cell foam rubber glued over the top. All this is under the carpeted section. If you will send me your E-Mail address in a PM, I can send you directly as many photos and descriptions as you wish. This seems to be a resource I can offer to BB members. My car is a 1965 Spider Veloce, owned from new. It is a good example for correct restorations.
__________________
Gordon Raymond
Illinois SNO Alfa Chapter Director
Illinois SNO Ferrari Chapter Director
and sometimes, CONFUSED AND INCORRECT, but Larry helps me out.
Now:
Illinois Chapter Director AND Charter Member of THE CONFUSED AND INCORRECT