01-06-2009, 03:34 PM
|
 |
Registered Alfa Addict
|
|
Join Date: Dec 2003
Location: Tempe, Arizona-US
Posts: 5,053
|
|
 Quote:
Originally Posted by Tetteh
The center bore is 73.
|
Then you need variation bolts and a 5-10mm spacer for the rear wheel to clear the strut. Does not need to be Hub centric as there will be enough hub even with 10mm spacer to hold wheel. But for extra safety you can do that.
I can make all this if needed.
You may want to run a 5 mm spacer on the rear to reduce offset to 30mm. with an 8" wheel it would be nicer. I run a et25 on mine with a 10mm spacer on rear which takes it to et15.
Jason
|