12-14-2008, 06:07 PM
|
 |
Trained Professional
|
|
Join Date: Feb 2003
Location: New Jersey USA
Posts: 8,248
|
|
 Quote:
Originally Posted by aggie06
2) used a noid to verify that the injectors are getting electrical signal
|
Quote:
Originally Posted by aggie06
5) hooked up to the feed line on the fuel rail and pressure goes to 55psi when the key is ingaged then if ingaged again to about 85psi
|
As Eric said, the fuel pressure needs to get checked with a tee in the feed line prior to the pressure regulator. Spec is 32-36psi.
__________________
Jim
Series 1 Euro 1750 GTV
Series 2 USA 1750 GTV
Series 3 Spider Veloce
|