Alfa Romeo Bulletin Board & Forums - View Single Post - Brake Master Cylinder Replace
View Single Post
post #1 of (permalink) Old 06-01-2003, 04:50 AM Thread Starter
Senior Member
Platinum Subscriber
Favali's Avatar
Join Date: May 2003
Location: Vermont's West Coast
Posts: 504
Question Brake Master Cylinder Replace

I recently discovered that my Brake MC has a small leak where it mates with the power servo unit. Presuming it is time for a replacement (as a rebuild is not worth it), I am looking for any advice, etc.

It appears straightforward and I suspect I will have to suck out some fluid from the belly of the servo unit (thank you Mr. Turkey Baster). However, does anyone have any tricks on bench priming the MC so I do not have to bleed all that air through the system?

Plus ... any experience with those one-handed brake bleeders?

TIA ....

********* *********
Rob Favali
1993 Spider Veloce (Winter Storage)
2013 Fiat 500C
2007 Saab 93 SportCombi
Favali is offline  
For the best viewing experience please update your browser to Google Chrome