[33gold]

Here are the bits, will try and drop the engine and mount the sensor plus get the crank pulley off and weld on the 36-1 wheel this weekend. As Baldy's diagram shows pretty easy to install, will install without Megajolt so the limp home 10 degree advance kicks in to see if it works first before programing any advance curves etc. I also need to weld up a fracture in the exhaust and get new engine mounts as last weekends trip led to the exhaust being fractured about 300 degrees round the pipe just where it joins the last 2 sections into one. Must be the increased torque and worn mountings .