I just finished a full front sus rebuild with Centerlines's parts. Bought them separately as I got into it. Should have just bought the kit. I liked everything, although two things I found are:
1. The new spring pans had a very thin black finish that was flaking off when they came. I was refinishing everything else with Eastwood's Chassis Black anyway, so I did them as well. (Many would say go with powder coating)
2. I head about this plastic washer for the caster bushing that I have never come across before in the thread below. See Papajam's reference in post # 6 of the thread.
105 upper A arm inner bushing problem
Good luck
Jeff