|
The funny thing is that all of the lights work, tail and front. The problem is that too many lights are lit.... Two red ones on the dash stay lit: the one labeled "brake" and the one with the circle that looks like a brake disc. Like I mentioned above, but didn't explain quite as explicitly as here, the only problem is that these don't go out. The manual says the "brake" one is for low brake fluid and that if the pair go red only when brake pedal is pressed, it's indicating contact of the brake sensor against disc. If they stay red all the time, then the brake wear sensor wire is worn through and gives open indication between the two pins. But I mustrusted my memory and have to look again about the brake wear sensor pins.
Michael
|