04-24-2008, 01:04 PM
|
|
Registered User
|
|
Join Date: Jan 2007
Posts: 228
|
|
 Quote:
Originally Posted by Alfisto Steve
Refer to Alfa Tech Service Bulletin 01.97.01
Inspect for "Type A" belt 60561244 new style belt. It has rounded cog teeth.
Old Style belt "Type B" has rounded cog teeth BUT with indention in middle of each rounded tooth.
Replace Type B with A.
If there is a white check mark on timing belt cover inspection has been done.
As for mileage if you have to retime cams and retension belt I would replace it.
|
That is what I was afraid of. Can't afford the £500 a garage will charge so going to have to do it myself - bit different to the last cambelt I did, on a 1.5 4-pot X1/9... Going to learn a lot, not doubt.
Thanks a lot for the help Steve. Really greatful,
Richard
|