|
Success! Using the timing template (thanks Steve), we sorted out the cams very quickly. But it still didn't want to fire. Pulled the front cam cover off to verify that the cam position which was good. Finally, we pulled to cap to discover that the cap and rotor were a mess - perhaps from when the anti-freeze boiled over. Swapped in a new cap and rotor and wires and vroom!
Not quite out of the woods yet as we need to button everything up and go for a test drive but it it was a big relief to see the 3.0 doing it's thing.
Thanks again for the great input from ya'll!
__________________
- Rich D.
I like Alfas
|