|
Yes,hand made here.
A jig-template was made for both sides.Takes about 3 hrs of banging with a hammer.
Amazing how much you can bend a straight piece of sheet steel.
i suppose its covered by the bottom of the front gaurd and the removable plate behind the inner gaurd,but thought a good relica was the thing to do..
Not stamped out,but banged-stretch,brutilated by a hammer only.
Robert
__________________
1972 105 GT Veloce 2000
1976 2L Spider
1984 GTV 6
2L Berlina grey,needs new home
|