|
Oh,and before I forget,a washer will have to be added to the top of the de-dion bush between the bush and the support housing.
I use a washer from the front wheel bearing.The one behind the nut that tightens the wheel bearing.
The hole will have to be opened up to fit the bolt.
Once the bush is fitted properly,the job is forgotten about,and the car more enjoyable to drive.
Remember,Use the special tool to fit it.
And,I put some loctite around the bush while installing it.
Hope this subject wasnt mentioned elsewhere.
Oh well,great tying practice and use of camera.
Robert
__________________
1972 105 GT Veloce 2000
1976 2L Spider
1984 GTV 6
2L Berlina grey,needs new home
|