 Quote:
Originally Posted by Ennio
How do you fit a V6 bush to an alfetta gt? I was told that the V6 is bigger so it must be cut.
Is it a recommended mod?
|
Quote:
Originally Posted by fluffy
There is no need to removed the manifolds. Only the center & rear exhaust sections need to be removed, it possible to burn & cut the old bush out if you don't have the correct tool - more difficult if dedion is still attached to the car but still possible.
Inserting a poly bush is a lot easier then going with a stock rubber part and you don't have to worry about staking the new bush in place.
|
From the cast iron manifold.Not including the cast iron manifolds.
__________________
1972 105 GT Veloce 2000
1976 2L Spider
1984 GTV 6
2L Berlina grey,needs new home
|