|
I have the caliper located at the end of the cable (the right, or passenger side of my car - it's left hand drive from Germany) working properly. The problem is the second caliper, on the left hand side, does not seem to be pulling evenly with the first caliper.
Therefore, what I have is one caliper locked when the handbrake is pulled, but the other caliper still seems to be loose. I have double-checked my clearances on the brake pads in the caliper and they are both set at the factory spec of 1 mm gap.
How do I get that second caliper synchronized with the first one so they both grab evenly when I pull on the handbrake lever?
By the way, both calipers are brand new and have been tested before being installed on the transmission.
|