So here is another unusual area that one wouldn't really expect to see much rust and yet there it was underneath the dash, carpets and floor deadening material! Now I've been staring at this bulkhead far too long in it's current rusty state and decided this past weekend to tackle it with my wire wheel.
With the passenger side floors out of the car, I have pretty good access to underside of the upper bulkhead and so now was the time to get down and dirty.
...the lower areas cleaned up pretty quickly....the upper took a little bit more effort and a lot of it having to work upside down. I also removed all the sealant which had a lot of cracks and open spots in numerous areas.
I removed the corner support for the dash, so as to clean it up behind there....this will make it easy to fix the spot welds that came loose on this flap piece ( I bent it up a little.. again to clean under it).
