Thread: 24v missfire/inactive cyl
View Single Post
  #9 (permalink)  
Old 06-22-2007, 03:39 PM
velocedoc's Avatar
velocedoc velocedoc is offline
Christopher Boles
Gold Subscriber
  
Join Date: Dec 2004
Location: At the other end of the state
Posts: 2,168
Where the ignition harness connects to the wiring loom, I would check pin conductivity between the ends to see if there is a short in the harness. If you have continuity, then I would go from there, most likely back towards the ECU?
Reply With Quote