Alfa Romeo Bulletin Board & Forums - View Single Post - What does this do?
View Single Post
  #2 (permalink)  
Old 05-29-2007, 07:13 AM
Alfisto Steve's Avatar
Alfisto Steve Alfisto Steve is offline
Senior Member
Platinum Subscriber
 
Join Date: Dec 2003
Location: VB, VA
Posts: 20,639
Dog bone upper engine mount aka lollipop or even upper engine mount. U-shaped yoke end attaches to mount on rear head which has or had a silent block molded rubber insulated bushing pressed into mount lug on rear head.

There is an adjustment turn buckle threaded into U yoke end and lollipop end so to adjust you have to have both jam nuts loose to turn turnbuckle threaded rod.

Lollipop end bolted to chassis upper mount with bolt and anchor nut.

Only adjustment you need to make is so bolts slip easily into chassis mount and head mounting holes when engine at rest on lower mounts.

Be sure bushing rubber in head mount is in good shape as well as rubber in lollipop end.

Poly bushing kits are avialable to replace worn out rubber mount bushings.
__________________
Ciao, Alfisto Steve
Virginia Beach, VA
AROC 164 Tech Advisor
http://www.aroc-usa.org/ click on tech advisors to contact me by email for tech advice or use this AlfaBB 164 section or an alfabb Private Mail.

Daily drivers: USA models - 91 164L w/AT "Black Beauty I" ALFA4ME; 91 164S Black Beauty II ALFALFA

SOLD MY91 "Bianco" 164B 5-speed [My Originale], ALFISTO Movin On!
Also gone are Old Blue 91 164L, Rosso1 93 164L, Rosso2 91 164S; QS2 164L

Daughter's current ride: Her Granddads 2002 Ford Taurus

Current Car hauler and Parts chaser : 2000 Dodge Ram PU 5.2L V-8

"A day without an Alfa whine is like a day without sunshine"
Reply With Quote