[1750GT]

The right side radiator shroud panel (left in photo) I obtained was from a 2000 GTV and has the opening for the air intake scoop. Although it's hard to tell from the photo...it had much heavier corrosion on the bottom edge than the original piece (right in photo). It was too different to the original to be useable...the original will be repaired.

..the angle/support for the radiator surround seal needed to come off so that I could correct the joggle on the upper edge... I drilled through the spot welds with a 3/8 inch bit and carefully nudged the pieces apart. I fabricated a new piece from scratch with a homemade former....