[83valentine]

I am investigating not working running lights, low beams, and turn signals on my 83 spider, of 1 week. (First week spent getting engine to start, darn safety switch.)
Behind the fuse box there is a 2 wire (red) female connector that is hot all the time. Unfortunately the female end is not connected to anything. Fuses 9-14 do not have any power to them. I strongly believe this is my problem, but I am hesitant to just try pluging it in to random male connectors on the fuse box. The two wires comming from it connect to : Road hazard and direction indicators intermittence (N13), and to a 4 wire plug at the bottom of the fuse box. The other three wires in this plug are SN, RN, BLN. This plug is the third one in from the driver side door and the plastic part is black. I am having trouble making sense of the wiring diagrams I have; may not have found the corrrect one yet. Any suggestions ya'll might have would certainlly shine some light on the subject. (pun intended)

Thanks, Brad