|
Hey Jes, nice work man - if all else fails you can go and wire up commercial buildings...
Hey, I know this means more work, but heck - you have come this far; why use those nice AN-pressure fittings and stainless steel braided hose all of the way from the rear to the front, only to still succumb to conventional rubber hose and clamps at the fuel rail!?
I am sure it will work; millions of cars running this way and the standard way that they do it on the Alfas, but remember the threaded nipples at the end of the fuel-rails on the 3.7 - can they source a nipple to match there right from the braided lines!?
__________________
Full-Race 3.7 Litre 24v Milano; Street/Track 3.0 Litre 24v Milano Verde; 6-speed 3.45 litre 24v Street 164 LS/Super; Future 24v Projects; '06 Scion XB - Runs! 
Last edited by junglejustice; 03-18-2007 at 07:14 AM.
|