|
No, I didn't test fit one yet. I was planning to pick up some appropriate tubing (of 10 mm ID) as substitute for the factory tool to insert the seals. You guys and the ones on the 164 section may be correct that as it is compressed (from the sides) going in it expands in length.
Jes
__________________
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeating what I suggest or do is at your own risk - be critical)
|