|
Jes, check out our stitch-welding next door on my 3.7...
Scott - this helped for sure! I mean, yes - these are monster roll-cages (but still), Jes' 3.7 (after seam-welding the entire engine-bay) - you could jack the entire front of the car STRAIGHT up in the air under one tire...
It was amazing! So much so that we decided that stitch-welding should be enough...
I did add some extra braces at the base of the V between the up-rights and do some additional stitch-welding along the sub-frame...
__________________
Full-Race 3.7 Litre 24v Milano; Street/Track 3.0 Litre 24v Milano Verde; 6-speed 3.45 litre 24v Street 164 LS/Super; Future 24v Projects; '06 Scion XB - Runs! 
|