|
GTAm fenders
Gowest-
I'm not clear from your post if you are doing a GTAm fender or a widened GTA fenderarch (see Italcarguy's White GTA)
If you have the full fiberglass GTAm fenders, then you would ultimately cut away most of the rear and front fenders (probably just below the crease line) and rivet the panels on. There are pictures in Alleggerita that show this cut out. It looks from your pics that you are looking to do the GTA arch, not the GTAm. If so, I can't give you advice on how much to cut
-Good luck
-JT
|