|
Lenus,
The 16v pulley has rings for the air-con etc as well as the alternator/water pump, so it needs to be machined down to just one ring as otherwise it will foul the radiator. So once I've had it machined down I'll be fitting it on. (I did look at fitting the one from my 1.5 engine BUT they are different and the 1.5 item won't locate properly so that was a no go). I've checked with some alfa racers over here and for a road car getting the pulley machined is fine, it won't affect the balance of the rotating assemby enough to worry about.
Also, I think its gonna be a very tight squeeze getting the fan back in, so I'll probably just get a slim kenlowe one or something and fit that instead.
Jaty.
|