Before installing it we had all the pieces on the scale - a total of 121 lbs
tough, knowing how much time and effort goes into removing 10 lbs... Though, the cage does provide two benefits:
1. Safety!!!
2. Stiffening the chassis.
Some more pics from the install:
1. The rear section all bolted in, though final tightning should wait until complete cage is in.
2. The front section in as well - very fast once the rear is in place.
3. Different angle.
4. Another...
5. Entire car. Note the rear ride height. This is with just one coil cut - looks pretty good once on the ground...
A few more cage pics in the following post.
Jes
__________________
87 Milano Verde - daily driver -
Juliet
87 Milano 3.0 Motronic - budget race car -
Roxanne
87 Milano 3.7 24v - race car
(Repeating what I suggest or do is at your own risk - be critical)