|
Rebuilding Shift Linkage
Made some progress this afternoon. I rebuild the shiftlinkage with Performatek's Monkey Shifter Kit - simple and straightforward. There was a huge amount of play in the little moving parts compared to new joints in the kit for rebuilding it. I put in new transmission mounts and bolted the Dedion front cross member back on. The press is handy to press one of the joints out and the new back in.
Find some pics below:
1. The original shift linkage still mounted.
2. The original shift linkage out on the ground (used a punch to tap the pin out and pull it forward off the shift rod going into the tranny).
3. The shift linkage after some cleaning and rebuilding with the parts from the monkey shifter kit.
4. The shift linkage back in.
5. Dedion cross member and new transmission mounts on.
Jes
__________________
87 Milano Verde - daily driver - Juliet
87 Milano 3.0 Motronic - budget race car - Roxanne
87 Milano 3.7 24v - race car
(Repeating what I suggest or do is at your own risk - be critical)
Last edited by AR4me; 08-16-2006 at 08:59 PM.
|