Yeah, I get my kicks from this
So, tonight I vacuumed out the little loose bits from chipping the sound insulation to get it nice and clean - still need some nasty chemical to clean off real well.
Then it was on to remove the old battery tray - a bit of a chore to do, but out it came without bending the sheet metal. Just got to find the spot welds and drill them. Though, with a nice and rusty battery tray from previous owners' neglect it can be hard to locate the spot welds...
Jes
__________________
87 Milano Verde - daily driver -
Juliet
87 Milano 3.0 Motronic - budget race car -
Roxanne
87 Milano 3.7 24v - race car
(Repeating what I suggest or do is at your own risk - be critical)