Plug gap for LS?

alfahill · #1 (**permalink**) 05-01-2008, 05:03 AM

I got my PFR6A plugs for the LS but the 94-95 Cardisc doesn't show the correct gap. The 91-93 Cardisc has penciled-in a gap of 0.024 to 0.028 for the S plugs that are the same type.
My PFR6A's have an exisiting gap of 0.030-.032, which may be close enough.
Can anyone tell me what correct gap should be for the LS? Thanks.

**treborblack** · #2 (**permalink**) 05-01-2008, 05:18 AM

the gap in metric is 0.7mm

no idea what the imperial measurement is sorry

Alfisto Steve · #3 (**permalink**) 05-01-2008, 06:24 AM

Math quiz time to convert mm to thousandth of inch x .03937 = inches.

So .7mm x .03937 = .028"

or .028" x 25.4 = .07 mm

25.4 mm = 1.000"

alfahill · #4 (**permalink**) 05-01-2008, 06:27 AM

Thanks. Hope this helps others too. I searched the BB, but didn't find the gap information before posting.

**treborblack** · #5 (**permalink**) 05-01-2008, 10:19 AM

Good post Steve