03-25-2008, 01:10 PM
|
 |
Registered Alfa Addict
|
|
Join Date: Dec 2003
Location: Tempe, Arizona-US
Posts: 3,398
|
|
 Quote:
Originally Posted by MVP
I know this has been talked about on this site 100 or so times but I still have to ask. Has any one found a replacement bearing inside the idler for the pulley for the alternator and ac belt? Just the bearing not the hole unit
THANKS FRED
|
I use a SKF bearing filled with Krytox grease. This grease out performs standard hydrocarbon grease by 400˚F and triple the load bearing. grease bonds to surfaces to protect them and the bearing should last for about 5 years or more without needing a re-pack.
Bearing alone with Grease: $79
re-packs -$17.00
I have had great success with the grease in all my idler pulleys I have packed for the 164 and other vehicles.
I guarantee the bearing will not fail. If it does in the first year I will replace it. I still may depending on the problem after the 1st year.
Jason
|
Linear Mode
