[kr442]

I will try that , I did find however that 1 of the crank sensors has an open circutI pluged the other in and get my correct ohms on terminal 25,26 when I switched sensors. just bought 2 on e-bay and both are bad go figure. so I need to get that fixed first. I also noticed I only have 4.5 volts on terminal 4 and 5 until i crank it then goes up to 12.4 so we are still checking on that one also. Might be a bad wire that runs from the back of glove box to puter. because at glove box purple wire has 12 volts ,when you get to computer down to 4.5 unless cranking.
So still plugging away, when I get home I will check the disk I also bought a manual for this car and going by the tree charts now step by step.We are finding more each time. Guess i shouldnt have let it set for a couple of years. Drive it the Barn tow it out to shop....lol
Will keep you posted Kevin