Measure the end of the control arm. I measured from the surface that contacts the body to the locking nut. Make note of the measurement.
Control arm has a placement in the middle for a wrench to hold. Using a 19mm wrench in the middle and a 27mm wrench (I didnt have it at the time), loosen the lock nut.
Using a 19mm wrench, remove the control arm ball joint.
Apply anti seize to new ball joint.
1991 Spider Veloce - Red on Tan - Rosa Bionda
1987 Spider Quadrifoglio - Red on Grey - Rosa - Sold
Honey, this is the last thing I have to do, then I'm finished. It'll just be a minute.