Alfa Romeo Bulletin Board & Forums - View Single Post - Standing clutch pedal removal

View Single Post
post #2 of (permalink) Old 09-18-2011, 02:15 PM
Platinum Subscriber
ossodiseppia's Avatar
Join Date: Oct 2003
Location: Broomfield, Colorado U.S.A
Posts: 8,346
It's a pain in the arse. Those pins are usually stuck pretty hard. I would suggest putting the nut back on the pin and tapping gently to see if you can persuade the pin to come out. I had to beat on mine pretty hard and damaged the threads on the pin. So care must be taken to not hit that thing so hard that you damage the threads. You might want to try the usual substances for "unfreezing" screws and nuts that are stuck hard.

Best of luck.

Originally Posted by MichaelM918 View Post
Good afternoon everyone, I am stumped at how to remove the clutch pedal lever and shaft from my Giulia TI. I have loosened the bolt that holds the pedal to the shaft but the bolt will not slide out all the way from the base of the pedal. It will not clear the portion of the casting that has the hole for the bolt that regulates how far the pedal travels toward the rear of the car. Any suggestions?


ossodiseppia is offline  
For the best viewing experience please update your browser to Google Chrome